The Magnetic Silicone Single Frag Holder or Probe Holder w/ Suction Cup is a unique holder that can be used either as a single frag holder or as a single probe holder. It has four “teeth” all around which along with it’s flexibility by being silicone allow it hold a variety of parts with different diameters pretty tightly. It is designed to hold parts with a diameter of ~7mm all the way up to 20mm. It will flex and mildly deform to accommodate all those diameters giving maximum usability. It is made out of food grade silicone and it comes in the color pictured (white somewhat translucent). It is pretty soft and malleable which makes it easy to place and remove. The back of the holder has an embedded suction cup and a magnet. This gives it greatly improved strength combining the best of both worlds. It does not rely on the merits of magnets or suction cups alone but rather combines them for a much better hold. It has been tested to hold up to 1/2″ glass although with the unique combination design it may allow for good hold on various thicknesses depending on usage and requirements. The “outside” magnet holder is also fully made with silicone allowing it to have a tight grip on the glass. The fact that it is fully encased in silicone allows it to also be placed inside water should your application require it (for example if you want to install this on a baffle that both sides will be wet).
- Made out of food grade silicone.
- Soft and easy to slip on frag plug stems or probes.
- Supports different diameter probes, including the Neptune Apex thick temperature probe.
- Designed to lock on stems or probes ~7mm-20mm in diameter. Being soft allows it to adapt well in a wide range of diameters.
- Four “teeth” allow it to “clamp” down on stem.
- Teeth do not extend all the way allowing more stem diameter options.
The embedded suction cup allows for a pretty strong grip on the glass. That along with the magnetic hold gives this holder a unique advantage combining the two holding mechanics together.
Please allow a few days from day of purchase to the time I ship since I make these to order. It will take a couple of days for the silicone to completely cure. If you want a better shipping time estimate before ordering, please contact me.
These are all hand made and poured so minor imperfections could exist however the core functionality of the product will not be affected.