Description
This is a wall mountable bottle holder for generic plastic PET bottles like the ones that can be found here. They are designed with threads to be able to screw the bottle right in. You can use these to from one to four bottles with dosing regiments.
- Printed out of PLA.
- Holds from 1 to 4 bottles depending on your choice.
- Optional “kit version” includes the bulkhead(s) and tubing.
- Optional “full version” includes bulkheads, tubing and bottle(s).
- The bulkhead opening is 18mm. If you bulkhead will not fit properly in this diameter let me know and I can adjust it as needed.
Please note that these are printed to order so allow a few days from order to shipping.
The decals with the level markings and elements are not included in this listing. They are shown for reference. If you want them, I do sell them separately here for you to apply. You can buy them here.
The plain pack includes the holder only. The kit version includes the holder, bulkhead(s) and tubing. The full version includes the holder, bulkhead(s), tubing and bottle(s). Please note that if you decide to procure the bulkheads yourself, not all bulkheads are created equal! You need them to be 0.85″ at their widest or less so they can fit through the bottle opening. The ones I provide with my kit and full packs barely fit snuggly in.
Also, if you decide to order the kit or full version the shipping date might be a little pushed back if my stock of those parts has run out. If you would like to know my current stock please contact me.
The holder dimensions are as follows:
- 13.6oz (400ml):
- Single: 3-1/4″ x 2-3/4″ x 8-1/8″ (with bottles mounted).
- Dual: 4-1/4″ x 2-3/4″ x 8-1/8″ (with bottles mounted).
- Triple: 6-3/4″ x 2-3/4″ x 8-1/8″ (with bottles mounted).
- Quad: 8-7/8″ x 2-3/4″ x 8-1/8″ (with bottles mounted).
- 16oz (500ml):
- Single: 3-1/4″ x 2-3/4″ x 8-1/4″ (with bottles mounted).
- Dual: 4-1/2″ x 2-3/4″ x 8-1/4″ (with bottles mounted).
- Triple: 7-1/4″ x 2-3/4″ x 8-1/4″ (with bottles mounted).
- Quad: 9-3/4″ x 2-3/4″ x 8-1/4″ (with bottles mounted).
- 32oz (1,000 ml):
- Single: 3-1/8″ x 3″ x 11″ (with bottles mounted).
- Dual: 5-1/8″ x 3″ x 11″ (with bottles mounted).
- Triple: 8-1/4″ x 3″ x 11″ (with bottles mounted).
- Quad: 11-1/2″ x 3″ x 11″ (with bottles mounted).
* Clear color is essentially PLA with no added color. It’s translucent but not transparent (like glass or acrylic).
